Go Back   Lateral-g Forums > Technical Discussions > Engine
User Name

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-25-2012, 03:01 PM
Yenko68 Yenko68 is offline
Join Date: Sep 2008
Posts: 84
Thanks: 0
Thanked 0 Times in 0 Posts
Default HEADERS for 68 Camaro Manual with 1 gen block

I'm reaching out to the experts. I have a 1968 Camaro with manual discs and and AGR quick ratio steering box. My motor is an 408 1 GEN block with Edelbrock Aluminum heads and I pulled the Muncie and am sticking in my new TKO600. I recently bought some Headman Elite shory headers and come to find out there is no room for the Z-Bar for the manul clutch. I don't want to buy any outragous headers since I want to bash it on the roads and tracks but any suggestions on PART#'s that will work. I know the 400 SBC's like smaller primaries but at this point I'll take a painted set. I', looking for the thicker flanges and the thickest gauge tubes I can track down to keep the leaks down. Not sure if shorties are better for ground clearance but I know most of you have moved on to the LS family so maybe you have a set that worked for you. I don't want to ding the headers just slip in some without modifiying them. HELP!!

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright Lateral-g.net