E-Brake for C6 Z06

[oldzzy]

Just like the title says, what e-brake can i use with the new C6 Z06 brakes.

[jeff hanson]

I had these brackets made to mount the caliper,backing plate(for original parking brake) and also hold the axle in. I am using a 12 bolt housing w/ large ford bearing ends. I used a lokar cable kit. If this will work for you, let me know, they can make a set of brackets for you. As of right now, I don't believe anyone makes anything else for this situation, but by now, who knows, things change everyday in this hobby!

[Bowtieracing]

Hello Jeff!!

Great info again! I have been thinking same thing for a while. If you can please give more pics of brackets. What do you mean at those brackets hold axles in? Like holding bolts will go thru the axle housing bracket , bearing flange and the vette part and mounts all together ?

[jeff hanson]

Yeah, that's pretty much it. I'll try to get you some more pics asap.

[ZZ4Blazer]

What mounting plates are you using? What rear are you bolting these to?

I've read on the pro-tourng forum, that the C6z rears will bolt up to the LS1 rear disc backing plates with just 2 simple mods. That should give you the ls1 rear disc style ebrake as well.

[PonchoJohn]

Any more info on this?

[67bird]

have you tried KORE 3? They offer a kit for 10/12 bolt rear for corvette rear brakes.

[Hammered]

The LS1 backing plates will work, but you need a 0.7-0.71" spacer between the backing plate and axle flange for a stock GM rear. The next problem is where to mount the cable bracket.

[Bowtieracing]

Originally Posted by 67bird

have you tried KORE 3? They offer a kit for 10/12 bolt rear for corvette rear brakes.

Can someone tell more about this KORE3 ?? What is it and is there a webpages etc ?

[PonchoJohn]

Looking for alternatives to Kore3... nice stuff, just out of my range.