Will do, I will order your kit once I get everything put together. Thanks! Markos

Just saw this.

I'll get one out in the AM.

Thanks.

Vince

Also interested in parts or a kit for my 69 Camaro. Sent you a message thru your e-store. If I went with Item #: MSP-BCBPKIT69, what reservoir does it come with? Then I would just need the GM LS FBody style slave and AN line and a speedbleeder?

LS3, built 98-02 FBody T56, Quicktime RM-8020 bellhousing, most likely a monster stage 2 clutch, and the 28lb steel flywheel (RAM, I think).

Matter if I run manual brakes w/o a booster? Want to add Hydraboost later on..

Thanks a ton.

Hi A,

I was just replying to your email.

It will work just fine with a Hydratech boost unit. We made a few revisions to work with their bracket.

Correct, QT bell 8020 can use the F body slave/actuator.

The master cylinder kit comes with a few choices of reservoirs.
No problem, this is why I put the kits out, so guys can piece them together if they wish.

Let me know if you need anything else.

Anyone install theirs yet? Does it sit flush on your firewall?

pm sent

There is a slight kick out at the bottom where the master cyl mounts that is not flush to the firewall but besides that it is flush. Once the brake master is bolted up its really hard to tell its not flush. I am very happy with mine and would not hesitate to to use it again.

What year and model? Thats how mine fits. The mount where the brake MC is sits flat, but because the bracket has a bend, it bows out towards the bottom. I would need to seal a large gap as is.


Pictures by chance?

The gap and pretty small and I was not too worried about sealing it but I did get this seam from a buddy and I was going to try to use it.

Mine kicks out a little bit, not much.

https://lateral-g.net/forums/atta...1&d=1417490039

I would like one of those boots though.