Ok here are some updated pics ...the leather wrapped dash is in and after several attempts i got a pic of the black swede headliner and wrapped roll bar.......
http://i158.photobucket.com/albums/t...rappeddash.jpg
http://i158.photobucket.com/albums/t...eheadliner.jpg

Ok i installed the old grill but i did not like the look so i decided to put in a fabricated grill i hand made from diamond mesh ..I think it fits the look of the car....
Old grill
http://i158.photobucket.com/albums/t...oldgrillin.jpg
So i made a templete of the old grill
http://i158.photobucket.com/albums/t...lltemplete.jpg
And transfered it on to the flat mesh ..
http://i158.photobucket.com/albums/t...gmeshgrill.jpg
Bent it up and walla here is the finished Grill...
http://i158.photobucket.com/albums/t...installed2.jpg
http://i158.photobucket.com/albums/t...installed3.jpg
http://i158.photobucket.com/albums/t...installed1.jpg

Well i go to start the car today after running the wires ..push button start and all ..and she cranks over but nothing else.. so i spend 2 hours trouble shooting the wires and swapping in three different coils..so i check the wires at my nice and expensive MSD Pro Billet Dizzy, oh and wouldn`t you know it that on a quality piece like an MSD the ground wire is broken in the connector.. no problem ill hard wire it ..ok still no spark ,so i take the cap off and the base plate to get to the inner electric reluctor (i think thats what its called) ..and there is no power in the wires ..so i removed the dizzy and i will disassemble it tomorrow to see what is wrong with the internal wiring..you know you try and buy quality pieces and it still dont work out..oh and i bought it 2 years ago so I guess theres no warranty left.. I was so looking forward to firing this baby up with open headders today.
Anyone else had a problem with an MSD dizzy???????

Making good progress now ..the remote door opener works from the key fob remote..That is cool...tail lights work ..the indicators well lets just say the LED`s are bright and the sequential indicator function on the indicators is Kewl as well...Headlight switch is in and works. Engine bay wired up and starts with the push of a button...now i just have to clean it all up.....SOON

love this build ......had to go back over it again. It is a great feeling to be in the home stretch....btw where in new york are you?

Thanks.... I am in Patchogue Long Island....Oh yea they say its gonna snow here today ..Not ready for snow this early in October.......:(

Wiring and more wiring ..the lights now work correctly and the stock gauges are working ..one day at a time ..now only have to finish ..exhaust..run brake lines ..fabb up back seat ..install front seats..carpet..seatbelt "cant forget them"..door panels..entertainment system..etc.. the list goes on..

I know its been awhile between dring as they say.. but heres an update..
Wiring 90% done finaly....
working on fabing up brake lines..
engine starts off a push button start..
here ar a couple of pics
Wiring up dash
http://i158.photobucket.com/albums/t...ringupdash.jpg
Its alway hair racing drilling through the painted sheetmetal..here are the rear brake line to the adj prop valve..
http://i158.photobucket.com/albums/t...ineinwork2.jpg
brake line under fender
http://i158.photobucket.com/albums/t...ineinwork1.jpg

Here is the front L/H brake line fabbed up ,
with these simple tools and patience you can make brake lines also..FYI.....Brake lines must be double flared....
http://i158.photobucket.com/albums/t...elinetools.jpg
http://i158.photobucket.com/albums/t...linefrtlh2.jpg

The car is still at my partner in the builds place not finished yet .....maybe one day he will finish up his end of the build..