Lateral-g Forums - Smoothing out the Firewall

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)

- - Smoothing out the Firewall (https://www.lateral-g.net/forums/showthread.php?t=10967)

street3285

09-06-2007 01:21 AM

That looks like a nice kit for smoothing the firewall. How much does that usually go for? Does it fit well?

Would you still want to use FUSOR?

rocketrod

09-06-2007 03:44 PM

I am currently smoothing my firewall, click the link for details http://www.camaros.net/forums/showthread.php?t=98442

street3285

09-09-2007 11:36 PM

Cars look great. Once I start the smoothing I will post some pictures.
Thanks for the great info guys.

jaronson

09-25-2007 01:49 PM

Quote:

We cut all the bumps from the firewall then made a cardboard template. That was then turned into a single sheet of steel to cover the entire firewall.

When you cut all the bumps off the firewall did you cut out the raised portion around the master cylinder and steering column hole or did you just sheet right over it and cut new holes?

It is slightly raised, but I wasn't sure if it would be enough to notice once covered.

Thanks for the help.

bigtyme1

09-25-2007 02:21 PM

The templates I got go around the steering plate. I think that is what most people are doing.

av8or32

06-23-2009 02:10 PM

Is it possible to smooth out the passanger side section of the firewall with the motor in the car?

All times are GMT -7. The time now is 05:18 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page