Lateral-g Forums - Are there any tips to drilling axle shafts for larger wheel studs?

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - Are there any tips to drilling axle shafts for larger wheel studs? (https://www.lateral-g.net/forums/showthread.php?t=17790)

Apogee

12-05-2008 05:19 PM

Quote:

Originally Posted by thedude327 (Post 181662)

If your drilling out for larger wheel studs and using the press in studs, what amount of interference fit do you need between the knurl of the stud and the new hole? Is there a spec. for this?

Thanks again for any replies
Paul

.007" to .010" interference fit with the extended length ARP studs works well in steel. We'll double that in aluminum.

Tobin
KORE3

thedude327

12-06-2008 12:51 PM

Thanks for the info. !!

Paul

Bad Bowtie

12-08-2008 06:58 AM

Paul,
Here is a link for Moroso wheel studs. In the description of the studs are the specs for the hole diameter hope this helps.

http://www.moroso.com/catalog/catego...?CatCode=25107

BB

thedude327

12-09-2008 07:44 AM

Quote:

Originally Posted by Bad Bowtie (Post 182235)

Paul,
Here is a link for Moroso wheel studs. In the description of the studs are the specs for the hole diameter hope this helps.

http://www.moroso.com/catalog/catego...?CatCode=25107

BB

Thanks for posting this link !! I made a printed copy for future reference. This is one of those things where having a handy ref. chart is a huge time saver.

Paul

All times are GMT -7. The time now is 08:03 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page