Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)
-   -   Clear over Aluminum (https://www.lateral-g.net/forums/showthread.php?t=18961)

VP23271 02-09-2009 11:09 AM
A similar question came up recently about brushed parts that a forum member wanted to clear over top. Maybe the info will help. My reply was post #6.

https://lateral-g.net/forums/show...ghlight=powder

MODO Innovations 02-09-2009 11:44 AM
The steps that need to be taken before anodizing might be harsh on polished surfaces.

camaro2nv 02-09-2009 12:06 PM
1 Attachment(s)
Heres a table I did.


All times are GMT -7. The time now is 05:47 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net