Very nice.

Jake did you remove the pinch weld on the rockers?

That looks great!!!
I am in the saving mode for my Max G, what ride height is that frame set up for?

a few more
http://i239.photobucket.com/albums/f...p/IMG_0078.jpg
http://i239.photobucket.com/albums/f...p/IMG_5012.jpg
http://i239.photobucket.com/albums/f...p/IMG_5003.jpg
http://i239.photobucket.com/albums/f...p/IMG_0076.jpg
http://i239.photobucket.com/albums/f...p/IMG_0058.jpg
http://i239.photobucket.com/albums/f...p/IMG_0065.jpg
http://i239.photobucket.com/albums/f...p/IMG_0037.jpg

yes, we cut the inner rocker completely out to the upper pinch weld, which is about 1 inch beyond the lower pinch weld, then plated across the rocker with .188 4 inch flat stock, using plug weld on top and solid welding rocker to bottom edge of flat stock, then metal finished to 180 grit. the frame is a 5 inch rocker height, bottom frame height set up.

Thanks Jake.

What kind of ride height?

Are you going to tie it with a cage?

This is going to be a killer project. Please post more pics :thumbsup:

yes, car will have a nicely tucked 10-12 point cage, 1.75x.120 dom.
ride height will be 5 inches at rocker, need to make it drivable.

Firewall
 

Is that a pre fabbed firewall or something you made? If so where to purchase?

We made it. i have a template and can make one pretty easy., it can be with or without the wiper motor opening.

Nice ride.

Looking good. Love the smoothed firewall.:thumbsup: