It can be done. You will have to use a mixture of 2 and 3" dia. roloc discs, 50 grit and brown scotch brite disc's- 80 grit cartridge rolls - 3/8 " wide belt sander with 80 git belts and scotch brite belts- 3" d/a with 80 grit hook-it discs and some final hand sanding. The key is to use Aluminum Tap Magic cutting fluid. Just a little goes a long way. Cuts down sanding time and build up of material on the discs. It's messy but well worth it.

Chrome don't get ya home.....

I'd powdercoat it. :thumbsup: That's what I'm doing to my Rocket 350's.

I started on it. Thuis is where I'm at so far.

http://img39.imageshack.us/img39/839...r455010.th.jpg
http://img39.imageshack.us/img39/864...r455005.th.jpg
http://img714.imageshack.us/img714/9...r455009.th.jpg

there's no turning back now. another 40 hours and you might be getting close:lol: