Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)
-   -   Big Hemi + twin screw, ever seen one on the street? (https://www.lateral-g.net/forums/showthread.php?t=36401)

SuperB70 04-25-2012 09:36 PM

A '68 Charger. "Black Bird" That link you can see what else the owner has done on it, last page and half is my work.

http://www.cardomain.com/ride/383724...-dodge-charger

There you can see that the car is ready for to power. Only missing roll bars and huge exhaust, Masi (owner) dont want them on a street car.

I'm doing this as an kind of show case for my company that it starting soon.

The T-man 04-26-2012 07:54 AM

Nice...
better put some tape over that oil fill..:_paranoid

SuperB70 05-01-2012 06:54 AM

Thanks,

Valve covers will be chanced to Stage V aluminium cast covers.

And I do keep all holes masked shut.

Edit: Actually, I'm not first with direct spark on Hemi, a guy from Sweden (where else? neighbor, naturally) is first:

http://www.hemipanter.se/

Sweet DeTomaso Pantera with 526cid Hemi.

SuperB70 05-17-2012 11:07 AM

So, 600 views but so few comments...?

Should I post some updates...?

GregWeld 05-19-2012 06:54 AM

I just went thru all the photos and captions (funny as hell). Nice job!!


:thumbsup:

camcojb 05-19-2012 08:49 AM

Quote:

Originally Posted by SuperB70 (Post 414848)
So, 600 views but so few comments...?

Should I post some updates...?

yep. :thumbsup: Updates and pics keep threads going. :unibrow:

SuperB70 05-21-2012 11:40 AM

No pic yet, just painting parts and starting on final assembly.

Charger is cardomain.com showoff of the week.

At the front page.:thumbsup:

SuperB70 05-24-2012 11:23 AM

3 Attachment(s)
Little something upcoming...
Air filter housing, came out pretty nice..
Attachment 35535

After wrinkle paint its way more nice...
Attachment 35533

All engine intake tubing is wrinkled, as is intake manifold... as are valve covers and engine block..

I did also build new 4" exhaust w/ Flowmaster race bullets & mufflers.
Attachment 35534

Painted with aluminium/silicone high temp paint.

SuperB70 06-24-2012 01:50 AM

6 Attachment(s)
So over 1K views but still not much comments...

Lets update this then...

I've been busy but electrician how was hired to install Motec-ECU and ISIS-Power has been slow.

He made engine wiring harness and he does outstanding work but it takes so much time.

We are 5 weeks behind original schedule.

Engine is all painted and has been assembled. Cool thing is that it fits under stock hood as plan

Not running yet.

ISIS is unfinished.

Now I have taken it to next guy...

Then to dyno... injector are good around 930HP on E85, Owner says that around 800Hp is enough. This is a street car.

Sorry about the quality of my pics,
I think my garage camera is at end of its life.
Attachment 36012
Attachment 36013
Attachment 36014
Attachment 36015
Attachment 36016
Attachment 36017

So its done on my behalf,
I'm flying to Florida at first of July :thumbsup:

GregWeld 06-24-2012 07:47 AM

Is the car in Florida? You lost me.... why the Florida trip?


All times are GMT -7. The time now is 03:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net