The other option is the Dakota Digital set up. They have a harness that plugs directly into the computer that hooks to the gauges.

http://www.dakotadigital.com/index.c...rod/prd722.htm

Then use this module to connect to the engine computer:
http://www.dakotadigital.com/index.c...rod/prd752.htm

Obviously this method doesn't use the plug that you are picturing, but sort of accomplishes what you're trying to do as well.

Just another option for yah!

Camaro 69 dash
 

Thanks for information code will check

Hello is that no firm as has build/produced dash to directly conected to that buikhead conector

Not quite sure if this is what you are asking or not.

If that is the GM engine controller for LS engines, that bulkhead does not have the wires in it for what you are asking. It has the check engine, tach wire, and some others in it, but it does not have turn signals, fuel sender, etc. in it.

You will be able to use some of them for whatever instrument cluster you use, but the bulkhead connecter in the gm controller isn't really an instrument cluster connection.

is this what you are looking for?

http://www.speedhut.com/gauges/36:5/freedom-gauges