Lateral-g Forums - New Product Release - Chassisworks’ gStreet Billet-Aluminum Spindle System

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - New Product Release - Chassisworks’ gStreet Billet-Aluminum Spindle System (https://www.lateral-g.net/forums/showthread.php?t=46972)

Thanks Carl I just spent the last hour going over everything you have for a 2nd gen :hairpullout: :waveflag: :hairpullout: Very nice!!!

And then of coarse :bow: :drool: :bow: :drool: :bow: :drool: :bow: :drool: :bow:

Quote:

We are considering a version of this upright that will fit Corvettes. No ETA is available for the Corvette version.

OK, I'm paying attention now...

Quote:

Originally Posted by cjfirstgen (Post 562834)

Carl, I cannot recall will these bolt up in place of the sculpted spindle or do other components have to be changed out as well? I already have the 6P Wilwoods.

It is designed to work with the wider track a-arms so you would need to change those too. Brakes are different too for a variety of reasons. The parts you would remove are compatible with the current Street Machine suspension series, so they could be easily cycled onto another project.

Quote:

Originally Posted by Rick D (Post 562849)

:thankyou:

Here's a behind-the-scenes picture of our new gStreet billet aluminum upright. In this pic you can see three phases of machining process: raw billet, first operation, and final operation.

https://fbcdn-sphotos-e-a.akamaihd.n...46320572_n.jpg