Lateral-g Forums - Hydraulic Clutch

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - Hydraulic Clutch (https://www.lateral-g.net/forums/showthread.php?t=51444)

Swain

11-04-2015 01:42 PM

Quote:

Originally Posted by Chad-1stGen (Post 620980)

How much lower what? The hole on the pedal arm or the pedal itself from shorter throw?

Made a new whole ten times better. Thanks for all the help guys

andrewb70

11-04-2015 04:06 PM

Careful that you didn't mess up the rod geometry. If it is putting a side load on the piston, it will wear out quickly.

What bore MC are you running? Chances are it is too big and swapping to a smaller bore MC will result in longer pedal travel and more modulation of the clutch.

Andrew

Swain

11-05-2015 10:21 AM

Its night and day different now with the new location on the pedal. Thanks for all the help guys.

Now i just need to get my reverse fixed.

All times are GMT -7. The time now is 02:16 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page