Lateral-g Forums - Wire loom

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Wire loom (https://www.lateral-g.net/forums/showthread.php?t=57417)

NickBurns

02-26-2019 08:06 PM

Quote:

Originally Posted by Musclerodz (Post 690127)

I like to use heat shrink when building looms from scratch. If I use techflex, I will either use heat shrink on the ends or a chemical tape that once activated its takes a razor blade to get it off. I have also wrapped looms in electrical tape for more factory look. It all depends on the job and budget.

Always respected your stuff ! I went with painless classic ... sharp bends its going to separate a bit ....... I guess

Sent from my iPhone using Tapatalk

ilikeike

02-27-2019 10:40 AM

Download the Techflex catalog, they make every type you might want, Hi temp, abrasion protection, heat, flame resistant...

https://cdn.techflex.com/assets/pdfs...talog-2015.pdf

NickBurns

03-04-2019 11:29 AM

I ended up with painless classic loom and I love it ....

Sent from my iPhone using Tapatalk

Gmachine1911

03-05-2019 07:19 PM

Quote:

Originally Posted by NickBurns (Post 690316)

I ended up with painless classic loom and I love it ....

Sent from my iPhone using Tapatalk

Told you so!:D. :cheers:

ilikeike

03-06-2019 08:11 AM

Looks like Painless uses the F6 Woven wrap.

https://www.techflex.com/general-pur...part=F6W0.38BK

Good prices at Amazon.

https://www.amazon.com/TechFlex-Wove.../dp/B00C1OCA92

All times are GMT -7. The time now is 12:20 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page