Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Shop & Equipment (https://www.lateral-g.net/forums/forumdisplay.php?f=56)
-   -   Drill bits, what's good? (https://www.lateral-g.net/forums/showthread.php?t=59424)

MODO Innovations 03-14-2022 03:57 AM
Quote:
Originally Posted by TechNova (Post 717628)
drill slow and use pressure, The heat is removed with the chip, if you are not making chips you are just rubbing creating heat that destroys the bit.
This.


All times are GMT -7. The time now is 02:48 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net