Brandon,

Just wanted you to know I was thinking about you and your wife.



--Eric

Thanks Eric! I've made some small progress on the car, fab'ed another floor panel. Work has been crazy busy. Going to shoot for wrapping up the floors in the next months or so and then it will be close to ready to come off of the frame table and onto the rotisserie. My helper (Dad) is on a motorcycle trip for a while so that hurts progress too!

Car looks great! sending you positive thoughts for your wife!

sorry to hear this Brandon, Wishing you both the best and hoping the easier treatment works.

Firewall Mount - -
 

https://lh4.googleusercontent.com/-1..._140536181.jpg

https://lh6.googleusercontent.com/-W..._150325885.jpg

Floor pans - getting pretty close -
 

I need to finish up the front of the tunnel and hammer and dolly some parts, but that'll be easier to do once the engine and trans are back out of the car. Making little bits of progress........ slowly, but surely!

https://lh6.googleusercontent.com/-7..._234715520.jpg

https://lh4.googleusercontent.com/-c..._234705281.jpg

Fabbed a slight bulge in the floor to allow for a little more header clearance
https://lh4.googleusercontent.com/-_..._234659522.jpg

https://lh4.googleusercontent.com/-F..._234723779.jpg

https://lh6.googleusercontent.com/-X..._234742724.jpg

https://lh4.googleusercontent.com/-P..._234759323.jpg

Just for fun
 

For some reason, I like this picture - - thought I'd post it just for fun......

https://lh3.googleusercontent.com/-s...202815_HDR.jpg


I still use a few tricks that my H.S geometry teacher taught us with a compass all the time - - bisect and angle, mid-point of a line - radius a corner etc..... You can see my markings. :)

Looking good Brandon, I hope all is well.

Thanks- we are doing well. Just living life!

Nice work! But whats up with that Suburban in the background?