Lateral-g Forums
Page 24 of 30 « First 142223 24 2526 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   '67 Chevy II Project (https://www.lateral-g.net/forums/showthread.php?t=46846)

waynieZ 11-23-2016 08:06 AM
Tha car is looking good, nice job on the fendr patch.

preston 11-23-2016 02:29 PM
Yeah I can TIG and patch sheet metal pretty well by now too, but I also struggle with really getting it metal finished - and in a way its a waste of time anyway as anything I build (or anyone else really) will get skimmed enough to cover it, but I"m always amazed how the pros can make their patches look like a continuous piece of metal that was never welded. I'd like to watch their finishing technique from start to finish some time.

and just go ahead and install A/C, you're going to want it sooner or later and much easier to put it in now.

pro66tour 11-23-2016 03:58 PM
1 Attachment(s)
Quote:
Originally Posted by wiedemab (Post 649168)
I also ordered a bunch more parts.

- Racepak IQ3S
- Holley HP EFI
- Holley accessory drive kit
- Vintage Air Gen IV with 3-knob controller - not running AC right now, but want to be prepared in case I do later.
- Factory reproduction radio delete pannel
- DSE Wiper kit
- Sparco 6 pt harnesses
- Braille battery mount
- remote battery mount kit - well, I bought it all from Waytek
- C6 Z06 Brakes (used from a buddy)

I'm trying to figure out what to do on wheels, but have a few options that I'm toying with.
Welds S77's will be the ones on my car soon. I believe they'd look awesome on yours too! I'm sure you've come across them by now…

wiedemab 11-24-2016 04:32 AM
I had planned on running the Weld RT-S 71......... They apparently no longer offer the width and backspacing that I need in a "high pad height" - which is what is needed to clear the C6Z brakes.

I've been thinking about the CCW LM-5 black center..

http://i54.tinypic.com/29qmlnb.jpg

Forgelines, unfortunately just aren't in my budget right now

65_LS1_T56 11-24-2016 05:08 PM
Quote:
Originally Posted by wiedemab (Post 649327)
Forgelines, unfortunately just aren't in my budget right now
20% off right now...:animated_bye_bye_em

wiedemab 11-25-2016 05:36 PM
Quote:
Originally Posted by 65_LS1_T56 (Post 649352)
20% off right now...:animated_bye_bye_em

I know.....that is still $1200 or so more than CCW..... I'm working on something though....

64G-lark 12-11-2016 09:44 PM
Wow Brandon. I'm am in awe of your fab. skills. The car looks really good. I sat down tonight and went through your whole thread. It was great meeting you and your Dad the other day at Tom and Deb's.

wiedemab 12-12-2016 06:07 PM
Quote:
Originally Posted by 64G-lark (Post 650419)
Wow Brandon. I'm am in awe of your fab. skills. The car looks really good. I sat down tonight and went through your whole thread. It was great meeting you and your Dad the other day at Tom and Deb's.
It was great to meet you guys too. Thanks....I'm just learning and trying to get better as I go along.

Sales@Dutchboys 12-14-2016 07:43 PM
More Chevy II...More Chevy II! As I'm sure you already know, I'm a fan! Looking good!

wiedemab 01-14-2017 02:44 PM
Roof Skin on and fitted up to the moldings
 
https://lh3.googleusercontent.com/I1...s=w400-h600-no

https://lh3.googleusercontent.com/6z...M=w600-h400-no

https://lh3.googleusercontent.com/7N...8=w600-h400-no


All times are GMT -7. The time now is 06:29 AM.
Page 24 of 30 « First 142223 24 2526 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net