Gage almost finished
 

Placed the drivers seat in yetserday and did a test fit of cage. Fit was great. The front bars to tie sub frame to cage is being finished today then the x bracing under the floor will be done. I will try to get pics this wekkend.

Cage updates
 

Cage is almost complete rear suspension will be finished this week.

Differential brackets are on
 

Should have the rear suspension done this week.

Wheels/tires for rear
 

So I scored a nice deal on rear tires and wheels. BUT, looks like I need to narrow the rear a little bit....

Wheels setup for final differential measurement
 

Well close to finalizing the rear. looks like another 1and1/2 inches off each side will place the wheels in nicely.

Progress
 

So here is a list of what has been done;
Front k memeber is now gone
Flip the spindles from right to left to get rid of the rear steer
Manual chrome rack fitting this week
custom k memeber in fab now
Differential now narrowed to 43 3/4" overall
New 35 spline axles on order
trial fit of engine starts this week
I will get photos when I can.

Fabulous build

Engine is being installed
 

The motor/trans are sitting in and mocking up mounts. Header kit is on its way.

Long time gone
 

Sorry everyone, the chassis guy working on my car had a bad slip and fall, Broken elbow and torn ACL.

he is back at it now and swamped from being out. The headers will be finished this weekend and the tin work in the back of the car will begin.
I am waiting for the ladder/4 link bars to get back from coating, did them in wood grian to mess with the tech inspectors at the track.
Afoc Big Gun adjustible shocks came in as well as the 2 fuel cells.

Engine setup changed a little, I had too much time to think:hairpullout:

Changing out the short block, power adder and the intake set-up. Oh and the transmission.
And my hood

Pictures of recent adds
 

So here are some pictures of the recent changes
the new Glasstek cowl hoos
Added double frame rails to the rear
Wood coated ladder bars