Very cool Cris! Love that color and color scheme.:thumbsup:
Nice rendering Ben.:thumbsup:

Sub-frame rails
 

Got my pcs today from water jet cutting.. So.. We started tack welding the sub-frame rails together!!

http://i1015.photobucket.com/albums/...n/IMG_0476.jpg

http://i1015.photobucket.com/albums/...n/IMG_0477.jpg

Looking good Cris.:thumbsup:

Awesome build going Chris!

Got a update!

The boys are working late tonite doing body work on the shell..

http://i1015.photobucket.com/albums/...n/IMG_0675.jpg

Finished modifying the front fenders & inner fender wells last week.. got to finish working the metal on the front fenders but all body mods are complete..

Gained about an inch of tire clearence & the front fenders match the qtr panel mods..

http://i1015.photobucket.com/albums/...n/IMG_0673.jpg

Cris,

I love the way you got more room in the quarter panels. That is how I was going to do my Camaro if it was not so low. Are you trying to get this ready for the RTTC II?

Brian

Brain! Shhhhhh....

Thanks Brian!

The goal is to have the car done by RTTC II! but I still need to work out all my suspension which is coming along but don't know if I will have done.. Right now I just want to get 1/2 the body work done & in primer.. & then get the suspension done..

I finally drew the line! I just want my car done ASAP.. no more custom stuff..I want to have a car to enjoy @ least by spring of 2011.. more than likely I will have the car in primer for a while till I shake the car out & then tear it apart & paint it with detail work..

Very nice Cris. So, this bad boy will be done for the spring time/summer time "cruising"? Awesome.:thumbsup:

Cris,

These don't look like carbon fiber frame rails to me!



--Eric

These are the molds for the carbon fiber frame rails! :D

Still in the body shop sanding away & fitting panels... Looks like my car will not be done till late spring if I am lucky!

http://i1015.photobucket.com/albums/...n/IMG_0722.jpg

Lookin good Cris.:thumbsup: Scott

Keep up the great work Cris. Looking good.:thumbsup:

Cris.......Giaz going to be driving soon!! Hurry up!!! Are you going to use those ZO6 brakes I sent you on this car ?

Thanks Scott!

Brakes are still up in the air for my car... trying to get Wilwood to let me run & test their new carbon ceramic rotors! :D :D :D

Sitting on the ground
 

All week I have been driving my guys nuts because I wanted to see my car on the ground!! Here you go!! A milestone for my car..

http://i1015.photobucket.com/albums/...n/IMG_0833.jpg

http://i1015.photobucket.com/albums/...n/IMG_0834.jpg

http://i1015.photobucket.com/albums/...n/IMG_0835.jpg

http://i1015.photobucket.com/albums/...n/IMG_0838.jpg

Gap Patrol!! Please take into consideration that this is a 100% carbon fiber hood here.. No exposed carbon on this hood

http://i1015.photobucket.com/albums/...n/IMG_0836.jpg


We got suspension! DSE Sub-frame.. Quadralink rear suspension to come in the next few weeks..

http://i1015.photobucket.com/albums/...n/IMG_0837.jpg

Cris -- that is sooo sick!! Can't wait to see it done.

Had the opportunity to see this car in person just a few days ago. It is absolutly phenominal. The level of work going on in this shop is pretty amazing. Beautiful work!!

Cris,

The car looks very nice. I recently experienced that "finally on the ground" feeling too. Congratulations and keep it up!

Brian

Cris,It is amazing the amount of work you and your crew get done. Camaro Look's frickin awesome. :thumbsup: Scott

Top notch Chris! Gia looks sick sitting on the ground. I can see you smiling right now.....

Cris --- That has to make you happy! It sure as heck put a smile on my face!

Cris, this is an awesome build to say the least, but PLEASE tell me where you got that heater delete panel? If you fabbed it, PLEASE say you can make another!!! NOBODY has a heater only delete for a 2nd Gen. DSE has one for 1st Gen and an A/C-Heater delete for 2nd Gen. I have scoured the internet looking for one.

Can't wait for more pics on this killer build. :thumbsup:

http://i1015.photobucket.com/albums/...n/IMG_0837.jpg

WOW! That looks sick already Cris. Very nice.
Sure is going to be a killer car when complete.:yes: :thumbsup:

The car looks great Chris. as usual nice work.

Looks great Cris!! :thumbsup: :cheers:

Thanks guys! I have the car sitting in the middle of my shop & everytime I pass by it .. I puts a big smile on my face.. Now the next stages to follow..

The punch list: I just ordered the engine mounts & steering shaft kit to set up the motor & transmission so that my buddy that used to work @ Borla can come over & make jigs for the headers & mandrel bend a set of custom headers.. build a transmission support that ties into the body.. The goal is to run the car @ the stance it is.. bit lower in the front.. More than likely I will have to cut the tranmission tunnel all the way to the back for the driveshaft..
Cut for muffler clearance.. goal is to stuff exhaust on the underside as much as possible.. Rick's gas tank on the way! I think! Plumbing.. 4 point cage, firewall to fender support bars.. My radiator from AFCO arrived last week..

Engine will be a small block 406 with a T56 for the time being.. LS engine is to come in the future.. QMP will be building me a 427 motor! but for now I just want to get the car done.. I don't want to go for another year or two till I get it done.. I have my 69 that I have to finish that has been put on the back burner till I get this one done..

The DSE ist gen worked for my car.. as long it is a non A/C car..

Wow! Nice build Cris. I'll have to come by and see it in person next time I'm out visiting Marty. I can't wait to see more progress. I bought Marty's Green 70 Z28 and started working on it last September. Keep the ideas coming.......

That's awesome brother---way to go----car looks sick on the ground with that stance---you nailed it for sure----see you in about a month at RTTC--then Sat night--my place---

Doug

Love the wheels Chris. As usual, outstanding work.

Thanks Ron! your welcome to stop on by & check it out anytime.. Good luck with your build!

Thanks Doug! Stance on the car has been a key factor on all the work we did to modify the qtrs & fenders.. See Ya Next Month!



Thanks Tyler! Been following your work.. Amazing! Keep it up..

Looking awesome Cris!

Thanks Eric!

I love this build Cris!:thumbsup: :thumbsup:

Done?

We have not had much time to work on my car.. but have been buying parts & have been working on it on Saturdays for the last couple of weekends .. Got the DSE Quadra link welded in place.. Starting the cage this Sat...

Ahhhhhh... the plumber has the leaky sink syndrome..................

Hey Cris, how's this bad boy coming?

:cheers: Matt