Axle Brake Line Clamps
 

I have 12 sets of these brake line clamps!

Send me your payment info and I'll send you money as promised

[email protected]

Assembled Clamps
 

Here is a pic of axle clamps assembled with fittings & clips :unibrow:

http://i1015.photobucket.com/albums/...n/P1010022.jpg

Chris...any chance these can be built to fit around a 9" with a back brace. I really like them, but don't think they will work for me as I have a Moser M9 with the back brace.

Here's a couple pics of my setup

http://i222.photobucket.com/albums/d.../PICT00293.jpg

http://i222.photobucket.com/albums/d...PICT0028-1.jpg

Or do you think the ones you have would work if I put it between the back brace and the lower shock mount. Here's a pic of where I'm talking about.

http://i222.photobucket.com/albums/d...9/PICT0026.jpg

Mike- I don't think their is a good way to get my clamps to work with the back brace rear-end.. I know we have round tube that we can clamp to but don't think it will give you any good plumbing options.. I got a great idea on how we can machine up some brackets that will mount to the back brace as long it is hollow.. or we have these other tabs that we weld to housing..

http://i1015.photobucket.com/albums/...n/P1010062.jpg

Looking @ the rear-end closer.. the clamps might work.. you can rotate clamps so that they are positioned on top of the brace so that you can run brake line to the center.. Measure the tube which should be 3.00 OD..

Just checked the Moser website...it is 3" O.D. The back brace is hollow. Where on the housing would the clamp fit? with mine, there is a bracket on the top for the short arms and on the bottom (you can see in the first pic) I welded on the bracket for the rear sway bar. I would be interested to see what you have in mind though.

You can mount the clamp on the space between the welded shock mount & the end of the brace.. rotate the clamp so that you can plumb on top of the brace instead of the center of the brace like the pic attached.. or fabricate an L shaped bracket that you can drill to the hollow end of the brace..

I hope this pic helps!

http://i1015.photobucket.com/albums/...n/P1010075.jpg

Are any of these clamps still availble?
 

I need a couple of these clamps. Are any left?

Yes, we still stock these. Ironically enough, we just sent our last set out a few days ago. We do have more coming, but will probably be a week or two before they are here..