We were having problems fitting 14" rotors in to 15" wheels so the old Cragars had to go.:lol:

Please tell me you're going to do a build thread of the 65/66 Mustang Fastback in the background?

I love the project, and what you did on the firewall. That rendering is sweet!

Very nice. You guys do killer work.:yes:
I can't wait to see this one done.

We have made some great progress in the past week on the car. Passenger side quarter has been installed and modified to fit. We widened the mini-tubs and finished the install. Started on to the driver side quarter and fitment. Also fit the front end and completed the driver side inner fender.

We started by fitting the passenger side quarter and noticed that we could drive a truck between it and the door.

http://i563.photobucket.com/albums/s...cture20631.jpg

The latch pillar portion was cut off the main quarter and the quarter was then fit where it needed to go. A filler strip added to bridge the needed space.

http://i563.photobucket.com/albums/s...cture20651.jpg

Tacked in place. The door still needs some attention to finish getting the gap 100% correct.

http://i563.photobucket.com/albums/s...cture20712.jpg

Final welded and metal finished

http://i563.photobucket.com/albums/s...cture20858.jpg

http://i563.photobucket.com/albums/s...cture20857.jpg

A taller tire and lower ride height in the rear didn't give enough clearance with the standard deep tubs. The tubs were split and widened to allow for the 335 20" PS2's in the back.

http://i563.photobucket.com/albums/s...cture21075.jpg

http://i563.photobucket.com/albums/s...cture21089.jpg

http://i563.photobucket.com/albums/s...cture21096.jpg

Cleaned up the flange on the inner fender and extended it over the upper shock mount and control arm.

http://i563.photobucket.com/albums/s...cture21100.jpg

http://i563.photobucket.com/albums/s...cture21137.jpg

http://i563.photobucket.com/albums/s...cture21141.jpg

Also started welding up the seam between the fender and lower valance corner.

http://i563.photobucket.com/albums/s...cture21135.jpg

Nice
 

Sweet build guys, gonna follow this one, ? who's replacment metal you guys using? and who's wheels are those that are on the mock up?
Thanks

There's people who can't afford aftermarket wheels, this guys use aftermarket wheels for mockup :P Looks great.

Nice work.:thumbsup: I love my Lincoln Tig 275.Look's like you guy's like them too.:thumbsup: