Lateral-g Forums
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   Speedtech Second Gen Torque Arm (https://www.lateral-g.net/forums/showthread.php?t=37110)

JasonElvisHeard 10-16-2012 07:56 PM
great craftsmanship on the TQ arm! Deserves a bump! :thumbsup:


Jason

dhutton 06-18-2017 06:52 PM
Anybody out there installed the 12 bolt version in a second gen?

Thanks,
Don

Blake Foster 06-19-2017 10:05 AM
i know we have sold a ton of them so they are out there.!!

dhutton 06-19-2017 10:43 AM
Quote:
Originally Posted by Blake Foster (Post 660945)
i know we have sold a ton of them so they are out there.!!
12 bolts in a second gen? Did you guys install one as part of the development? Any pics?

Thanks,
Don

Blake Foster 06-20-2017 12:22 PM
We have not installed one here with a 12 bolt. in a second gen first gen yes.
Seems most want to change to the 9" i can see if i can find some pics form one of our customers that has used a 12 bolt
stand by

BMR Sales 06-21-2017 11:48 AM
Quote:
Originally Posted by Blake Foster (Post 660992)
We have not installed one here with a 12 bolt. in a second gen first gen yes.
Seems most want to change to the 9" i can see if i can find some pics form one of our customers that has used a 12 bolt
stand by
Since most 2nd Gens came with a 10 Bolt, we see most people going to a 9" too!

Blake Foster 06-28-2017 10:39 AM
we have not had any feed back from customers with this info. i am sure we would have at least done a mock up but it would have been a long time ago. there is no doubt that the 2 gen tunnel is small compared to the first gen. the other limiting factor on ride height in the 2 gen is the outer fender. i would be surprised if the pinion mount and tires didn't contact at the same time.

Blake Foster 06-28-2017 05:03 PM
Quote:
Originally Posted by dhutton (Post 661359)
Well I am not going to argue with you but I know when I called I was told that even the 9" required trimming of the seat belt reinforcing plate even though that 9" pinion mount is shorter and sits 2" farther back in the tunnel.

Anyway tunnel is now modified. Moving on. Now you have some feedback... :)

Car also has your Extreme subframe. I have to say it looks awesome, especially that rack...

Thanks,
Don
Well thank you for the feed back. can you send me some pics of the mod you needed to do?

DBasher 06-28-2017 10:01 PM
1 Attachment(s)
Speedtech being represented in the NW! I never saw the front end but was able to peak under the back and see that beautiful TA, great looking car with the potential to be dang quick.
:thumbsup:


All times are GMT -7. The time now is 02:25 PM.
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net