Lateral-g Forums
Page 6 of 14 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   Scott Mock/vrp New 2013 Sub Frame Design (https://www.lateral-g.net/forums/showthread.php?t=39949)

coolwelder62 02-08-2013 03:12 PM
Quote:
Originally Posted by sixnina (Post 463387)
Scott,
Awesome work looking at subframes for my project and was wondering about options and pricing as well if you don't mind Pm'ing me.Thanks Shane
PM,sent Shane. Thank's for asking.:thumbsup:

exwestracer 02-09-2013 08:15 AM
Nice piece, Scott!

Sorry if this is a stupid question, but are you using a curved sway bar arm? I ask because the bar tube seems pretty close to the height of the LCA mounts.
http://i1104.photobucket.com/albums/...vellexv011.jpg
Any pics of the bar "mocked" up in there with the end links, etc?

coolwelder62 02-09-2013 10:38 AM
The center of the sway bar is 1.25 higher than the LCA mount center.And I bent the splined sway bar arm so there is no binding with 1/2 rod end links.

exwestracer 02-09-2013 11:11 AM
Quote:
Originally Posted by coolwelder62 (Post 463574)
The center of the sway bar is 1.25 higher than the LCA mount center.And I bent the splined sway bar arm so there is no binding with 1/2 rod end links.
Ah. Are you using a M/F heim set up for the end link?

p51mus 02-09-2013 11:50 AM
frame
 
Did I see that you are going to build an all aluminum frame also? Thanks, Garry.

coolwelder62 02-09-2013 04:30 PM
Quote:
Originally Posted by exwestracer (Post 463579)
Ah. Are you using a M/F heim set up for the end link?
Yes, 1/2 male & 1/2 female heim w/cone spacer's.I will find you a close up photo.:thumbsup:

Quote:
Originally Posted by p51mus (Post 463591)
Did I see that you are going to build an all aluminum frame also? Thanks, Garry.
Yes,Making drawing's Now for the CNC cutting table.Materials in house.
Going to build one proto type then test.Figure's show that the bare will only weight #58-62 lbs.6061 material & completely tig welded.(No paint needed)

coolwelder62 02-17-2013 05:50 PM
Kevin,Started the final welding on his sub frame today.Should have all finished in a few Day's

coolwelder62 02-17-2013 05:58 PM
Quote:
Originally Posted by exwestracer (Post 463579)
Ah. Are you using a M/F heim set up for the end link?
Here is a photo of the heim ends used to conect to the LCA.http://i1104.photobucket.com/albums/...mc-6sub003.jpg

itsals1 02-17-2013 06:04 PM
Looks like he takes after "The Old Man" :poke:! Nice job on your frames!
Travis

coolwelder62 02-17-2013 06:17 PM
Quote:
Originally Posted by itsals1 (Post 465380)
Looks like he takes after "The Old Man" :poke:! Nice job on your frames!
Travis
Kevin is prob, a little steadier w/mig gun these day's.He's 22 year's younger than I am. :thankyou:


All times are GMT -7. The time now is 08:28 PM.
Page 6 of 14 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net