Not sure what size the owner plans on using. On Modified Mustangs & Fords project car they said 295/35/18 fit. On another forum someone else moved their tubs in 2" and has 305/20 on his Mustang.

The outer wheelhouse did not match the inner. We had this same problem on the 65 coupe and the outer wheelhouse was from a different vendor. Brian cut it in two than test fit the front

http://img.photobucket.com/albums/v3...ustang/410.jpg

http://img.photobucket.com/albums/v3...ustang/411.jpg

He cut the rear section than welded it together

http://img.photobucket.com/albums/v3...ustang/412.jpg

After taking the B pillar apart we found it was beyond repair.

http://img.photobucket.com/albums/v3...ustang/413.jpg

They only make them for a coupe so he had to make a patch

http://img.photobucket.com/albums/v3...ustang/414.jpg

http://img.photobucket.com/albums/v3...ustang/415.jpg

http://img.photobucket.com/albums/v3...ustang/416.jpg

Today Brian finished sanding and I sprayed two heavy coats of SPI epoxy.

http://img.photobucket.com/albums/v3...ustang/417.jpg

http://img.photobucket.com/albums/v3...ustang/418.jpg

http://img.photobucket.com/albums/v3...ustang/419.jpg

http://img.photobucket.com/albums/v3...ustang/420.jpg

http://img.photobucket.com/albums/v3...ustang/422.jpg

http://img.photobucket.com/albums/v3...ustang/423.jpg

After every thing you guys did on this car that patch on the new B pillar must have felt like childs play. Excelent work.

Brian is lining up the sheetmetal with screws for the last time after he drilled holes for the plug welds

http://img.photobucket.com/albums/v3...ustang/424.jpg

Starting to plug weld

http://img.photobucket.com/albums/v3...ustang/427.jpg

http://img.photobucket.com/albums/v3...ustang/428.jpg

http://img.photobucket.com/albums/v3...ustang/429.jpg

http://img.photobucket.com/albums/v3...ustang/430.jpg

I'm going to tell the truth by saying I didn't read anything, just looked at all the pictures and I think your nuts! but keep up the good work that thing is going to be nice when done!

Nice work. Well done. Keep the posts coming. Love to see the progress!

Brian has everything back together except welding on the roof.

http://img.photobucket.com/albums/v3...ustang/431.jpg

http://img.photobucket.com/albums/v3...ustang/432.jpg

http://img.photobucket.com/albums/v3...ustang/433.jpg

http://img.photobucket.com/albums/v3...ustang/437.jpg

Amazing difference from what it was. Very Nice.

Amazing work! Rusty and Brian are the real deal when they get involved with these mustang's and shelby's. Great job as always.:thumbsup: Joe