Lateral-g Forums
Page 9 of 14 « First 78 9 1011 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   Scott Mock/vrp New 2013 Sub Frame Design (https://www.lateral-g.net/forums/showthread.php?t=39949)

coolwelder62 03-01-2013 05:42 AM
Quote:
Originally Posted by bret (Post 467859)
Tell Albert to get off the phone so you can sell something! :)
:lol:

Ketzer 03-01-2013 07:12 AM
Quote:
Originally Posted by coolwelder62 (Post 467852)
My stock sub is outside under 23.6 inch's of snow.So will a little bit until I can bring it in and weigh it up.
Ouch! My buddy from Springhill KS sent me some snow pics, looks nasty!


Jeff-

coolwelder62 03-01-2013 08:55 AM
It will probably be may before all the snow melt's.

syborg tt 03-01-2013 09:34 AM
Well you have peeked my interest for Phase 2 of the camaro Project.

Put me on the list for when you make a 2nd gen version.

Ketzer 03-01-2013 09:38 AM
Quote:
Originally Posted by syborg tt (Post 467935)
Well you have peeked my interest for Phase 2 of the camaro Project.

Put me on the list for when you make a 2nd gen version.
Project creep alert! :G-Dub:


Jeff-

syborg tt 03-01-2013 09:41 AM
Quote:
Originally Posted by Ketzer (Post 467939)
Project creep alert! :G-Dub:


Jeff-
Hi Jeff,

LOL - yep kinda.

The plan is to debut the car this year as a driver and then over the winter tear it down again and step the build up to the next level.

Then of course there is the 72 Baracuda project that I plan to go all out on. Full custom chassis, raised floors something similar to what Tim Bruning did with the e-ticket challlenger. Just not twin turbo.

coolwelder62 03-01-2013 01:42 PM
Quote:
Originally Posted by syborg tt (Post 467935)
Well you have peeked my interest for Phase 2 of the camaro Project.

Put me on the list for when you make a 2nd gen version.
Will be working on the 2nd gen rework before long.I am having the 2nd gen. part's drawn for the CNC plasma now.

MCB Matt 03-13-2013 10:12 AM
Looking good Scott! I am looking forward to working with you!!!

Matt
MCB

syborg tt 03-21-2013 08:06 AM
Gotta a Quick Question.

Since your building these from scratch are you narrowing the middle section to increase tire clearance allow for a better offset wheel ?

coolwelder62 03-21-2013 10:03 AM
Quote:
Originally Posted by syborg tt (Post 471444)
Gotta a Quick Question.

Since your building these from scratch are you narrowing the middle section to increase tire clearance allow for a better offset wheel ?
The std. unit's will already allow a 18x11 wheel w/315 tire. I am working on a narrow unit that will allow a 18x12 wheel w/335 tire W/O any fender widening.The narrow unit requires alot of header work and steering shaft fitment to work with the narrow frame rails.Call me if you have more Questions.:idea: :idea:


All times are GMT -7. The time now is 03:35 AM.
Page 9 of 14 « First 78 9 1011 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net