Gen VI 454 Block & parts
 

Back on the market.................this is a crazy good deal. The block was this much by itself.....

It's a Gen VI block that has been line honed and decked. It was brand new when I bought it. It's .030 over with a 4.280 bore. It also comes with the timing cover and a remote oil filter adapter.
The crank is a scat cast external balance standard with 4.25 stroke. Rated for 700hp. I also have a professional products balancer and centerforce billet sfi flywheel with low miles.
I have a set of I beam rods(6.385) with ARP cap screws.
The cam is a crane billet hydraulic roller with press on cast gear.(For longevity) .632 lift I/E 244/256 at .050 on a 114 lsa. Made 593hp at 6k and 587 at 3700.
Also have a moroso 6 qt oil pan that fits a Camaro and multiple other cars.
It's all in good shape, the cylinders may need a bore.
I'd let it all go for $1100 firm if you pick it up.



http://i200.photobucket.com/albums/a...ePhotos003.jpg
http://i200.photobucket.com/albums/a...ePhotos004.jpg
http://i200.photobucket.com/albums/a...ePhotos005.jpg
http://i200.photobucket.com/albums/a...ePhotos006.jpg

Todd, we need a price :D

John

Fixed....

This is a 1-piece rear main, correct?

Can be....I have a 2 piece adapter so it's your choice of which crank shaft you want to run. For leaks the 1 piece is better. You could easily put a GM crankshaft in it. I have a centerforce external balance flywheel that would work perfect as well. I'll make you a pacage deal. :unibrow: I don't have room for it.....

It's crated up and no reasonable offer will be refused. It needs to go down the road.........

HA! I'm trying to fight the urge :D . Someone needs to pick this up. Didn't you guys hear they shut the plant down and aren't making BBC's anymore hehe.

John

Bump for my buddy Todd!:cheers:

4 bolt main?

Yes sir......

Bump for Todd!:cheers:

Thanks buddy....somebody needs this block cheap.....:lol:

the crank you have is it the 4.25 crank. thx drew.

Dang my timing sucks as usual. This is a super steal for a local guy that can avoid shipping.

John

yeah deff. a steal! too bad a local guy(me) lol knows i wouldnt be able to do anything $$$ with the block except let it collect dust like the rest of my car...:(

You may inherit it if someone doesn't steal this stuff. :unibrow:

Todd did you get my reply?? The main issue for me is the drive. Lets work out the shipping! Can you PM me your number. I will give you a call.


Thanks Ron

Sale Pending.....

bbc
 

is this sold?

The deal is on the rocks, I'll let you know by tomorrow.

thanks for the quick response

Back on the market................. this is a crazy good deal on this stuff. The block was this much all by itself.

It's a Gen VI block that has been line honed and decked. It was brand new when I bought it. It's .030 over with a 4.280 bore. It also comes with the timing cover and a remote oil filter adapter.
The crank is a scat cast external balance standard with 4.25 stroke. Rated for 700hp. I also have a professional products balancer and centerforce billet sfi flywheel with low miles.
I have a set of I beam rods(6.385) with ARP cap screws.
The cam is a crane billet hydraulic roller with press on cast gear.(For longevity) .632 lift I/E 244/256 at .050 on a 114 lsa. Made 593hp at 6k and 587 at 3700.
Also have a moroso 6 qt oil pan that fits a Camaro and multiple other cars.
It's all in good shape, the cylinders may need a bore.
I'd let it all go for $1100 firm if you pick it up.

That's an amazing deal. I wish I lived closer to you.

I just went through this with the last buyer. He lived in Northern Cal and shipping was only $280 if I drop it off at Yellow freight here in town and you pick it up. If you can't pick it up then it's like $420 to your door. I am also going over to Hesperia CA in February. You could meet me there and save on shipping.

Hey whats in Hesperia... ?:_paranoid I didn't think anyone knew where Hesperia is.:)

My engine buidler, Pettis Performance.:thumbsup:

LOL... they sure are. Half a block away!

GREAT DEAL!:thumbsup:
Bump for Todd.

Todd I can't believe you haven't sold this stuff yet. If I wasn't stuck on building a 540 I would buy it from you in a heart beat. However I may know someone that may be looking for what you have I will let you know in the morning.

Thanks.....it was pending for a week. If I had room I'd keep it. Lot's of interest, I'm sure it will be down the road soon. Let me know on your buddy.

I may want that oil pan, if you seperate it? How did it work on the track?

Not willing to seperate at this point......

Todd-

I am waiting for a call back from my friend that builds a bunch of Big Block Drag engines. He has someone looking for a 496 BBC I would think this might work out great for him if the guy is serious. I am supposed to get a call back today, so I will let you know. I just wanted to update you and give you a bump to the top too.

Larry

Last chance before I list the whole kit and kaboodle on Chevelles.com and Camaros.net. The block was over $1,000 all by itself. The whole enchilada is $1,100 and I'll ship it. The block is already in the crate. Here is the rest of the parts.(Dipstick and Pistons not included)
http://i200.photobucket.com/albums/a...ePhotos015.jpg
http://i200.photobucket.com/albums/a...ePhotos016.jpg
http://i200.photobucket.com/albums/a...ePhotos018.jpg
http://i200.photobucket.com/albums/a...ePhotos020.jpg
http://i200.photobucket.com/albums/a...ePhotos021.jpg

http://i200.photobucket.com/albums/a...ePhotos001.jpg
http://i200.photobucket.com/albums/a...ePhotos009.jpg
http://i200.photobucket.com/albums/a...ePhotos010.jpg

Todd

I talked to Joe today and the guy he had interested hasn't come up with the money. I would take that as he isn't serious. If I weren't dead set on 540 inches I would take it but a guys got to have goals. Good luck.

Sorry for all the (dumb?) questions
 

Todd,

Why do you think the cylinders might need a bore? Is that the only machine work that may be needed? Roller cam, but not the lifters, right? And you're including the 2-piece rear main seal adapter? $1,100 shipped (to Calif zip 93245)? Let me talk to the boss, er, wife, (:hail:) and give you an answer tomorrow?

Larry (no relation to jr421)

Hi Larry,
I can feel a few of the wear marks in the cylinders with a finger nail. It needs cam bearings, and it does have the 2 piece rear main seal adapter. No lifters are included. I'm firm on the $1,100, any cheaper and I'll just set it on the curb for the garbage men. :rofl: I can meet you in Hesperia or Barstow next month at no charge. Looks to be under 4 hours from you. Shipping will be around $350 if you pick it up at yellow freight. Let me know what the boss says.

If this post only had a Darrel

jr421, "that's funny right there...I don't care who ya are!"

Todd, I just sent you a pm. She said yes, but with conditions. (She is my impulse restriction mechanism.)