Speedtech's G Body Track Time
 

Well here it is.
Front includes
AFX spindles, upper and lower tubular arms, Ridetech coil overs 1.25" sway bar and front chassis brace lee steering box. wheels are 18 x 9 up with 275 35's
Rear includes
Articulink Trailing arms Ridetech coil overs 3/4 adjustable sway bar
rears are 18 x 9.5 with 295's
still room to lower another 1/2 to 3/4 if wanted.
http://i1235.photobucket.com/albums/...a/DSC_2955.jpg

http://i1235.photobucket.com/albums/...a/DSC_2950.jpg

http://i1235.photobucket.com/albums/...a/DSC_2958.jpg

Nice!

What size rotors are those?

:thumbsup: :thumbsup:

That looks killer Blake. I suggest posting what you had posted here over at; http://www.turbobuicks.com/forums
I have to tell my buddy who owns a "modded" '87 Grand National about these parts for sure!:thumbsup:

Not your average grocery-getter. :unibrow:

Still love those GN's, I remember installing one of the first Hypertech chips in a friends car and being very impressed with that little V6. Now you've completed the package. Good work! :thumbsup:

Looks awesome, Blake! Love the diamond cut on the black Forgelines!

The 80's was tough on cars but a Grand National is one car I wouldn't kick out of the garage.:thumbsup:

yea I agree I have Always wanted one, this one was a total stocker other than a downpipe, exhaust and a chip when i got it, not planning on doing anthing to the motor except to make it run well, i added a boost controler 43 lb injectors and a turbo tweek chip, THAT's ALL I'M DOING :_paranoid :_paranoid
but the suspension is now done and we can put all the parts into production. some already are but not all of them.

Will this be offered in kit form and for sale seperately? What's the pricing looking like?

Yes to both.
pricing has not been finalized but will be in line with all our other packages. it will depend on what parts you would like as well as what options and or upgrades.

Hi Blake. Do your upper and lower control arms allow bigger tires up front? What the back spacing on wheels? Looking to put 18x9 on all 4 corners.

Damn that looks good... always love that generation of G-body... now if only I could see that stance/wheels on a black Monte Carlo SS :cheers:

This one has 18 x 9 up front wit 6"BS and 275/35/ NT05's
18 x 9.5 in the rear with 5" BS and 295/30/ 18

Thanks for answering my question. Are you going to have this car at SEMA?
Is there any plans of building a T-56 crossmember for g-body cars?

LOL i don't think the car will go to sema but thanks for thinking it is WORTHY :thumbsup: can't say i have ever seen a GN at SEMA,

Is there any chance of making t56 trans crossmember down the road?

Have thought about it. but there are alot of other things on the list infront of that. sorry

If you do make it down the road. I know you be first ones, that I know of. Thanks for your responding back.

Can you share picture of rear suspension on car, with us?

That looks really good and I am sure its a blast to drive.

It's 154% ( thats just an estimate) improvement over the original stuff thats for sure.

That may be an understatement! :D

I can only imagine the difference is close to night and day.

yea night and day would probably be a better description.

Great looking car Blake. Finally someone has backed up that great motor with a first rate suspension and brake package. :thumbsup:

Now maybe chop that top 1.5" :unibrow:

Can you post up more pics of the suspension setup? I love the wheel/tire combo also. :thumbsup: :thumbsup:

i will be getting more pics this week of the bottom side of the car

EH!!


LOL

I don't get it????


:lol:

I love your car!

Thanks.


I get that alot.....................:_paranoid

:thumbsup:

Pictures of suspension next week?

working on it, really busy, will do my best this week end to get something for you

I understand. You one of the busiest people in this industry.

Would your rear upper and lower control arms work okay with Ebiach springs? I got all of my front suspension from SC&C already.

Yes for sure, you will also need the ProTouring adjustable sway bar as the factory one will no longer attach to the lower trailing arms.

Sorry the pics are not Catalog quality.
here are a couple of the rear. the package includes the Trailing arms with Articulink joints, delrin busoings adjustable uppers and lowers with adjustment for antisquat and instant center. the coilovers are Ridetechs this set are the non adjustable ones that we are testing out. Protouring adjustable sway bar as well.

http://i1235.photobucket.com/albums/...odyarms019.jpg



http://i1235.photobucket.com/albums/...odyarms012.jpg


http://i1235.photobucket.com/albums/...odyarms002.jpg

And some of the front. this package uses the Speedtech new Tubular arms AFX Spindles, and ridetech coilovers, as well we have done a front chassis/steering box brace. The new Protouring hiclearance sway bar.

http://i1235.photobucket.com/albums/...odyarms022.jpg

http://i1235.photobucket.com/albums/...a/DSC08964.jpg

http://i1235.photobucket.com/albums/...odyarms028.jpg

Any Questions let me know

Love this car and definitely considering these parts for my WE4 Turbo Regal.

Blake how would that triangle brace fit with a stretch intercooler? i have the DSE one and they interfere with the ic.

i will guess that it will also not fit, there are so many different combos you can really only make them for the original set up, A buddy of mine also has a GN with an aftermarket intercooler and our chassis brace won't fit his,
you would probably have to have one cusom made.

When might we see prices released on the GBody pieces? May be interested in some pieces in the near future for our MCSS.

Next week

Any price releases on these parts yet?

The parts that are available to sell are priced on the site.
if you would like any additional info feel free to call.