Stainless fittings?
 

Help!

I am looking for a stainless fitting for my proportioning valve. Inverted flare (3/8-24) to 1/8" NPT.

Like this.... only stainless.
http://i1113.photobucket.com/albums/...6/IMG_2342.jpg

I have tried Summit, Jegs, SSBC, Inline Tube, Classic Tube, Grainger, and a few internet sources.

Anybody know where I can find them?


Thanks,

Bill

Bill --- Check with Mark at Bent...



http://www.bentcustomandperformance.com/

Thanks Greg. I was hoping he'd see this & weigh in. I didn't want to bother him over a $5 part.....


Bill

I would like to know what you find . I searched high and low for stainless brake fittings awhile back and it was tough. I found them in aluminum from wilwood i believe. There must be a reason they arent easily found

Of course there is. It's because I NEED (want) them!

I have found about every brake fitting you can imagine in stainless EXCEPT this one.

Oh well, that's HOT RODDING!


Bill

Can you find me a Tee that's 1/8" NPT male to two 1/8" NPT female in stainless? All i can find is NOS brass one. Need it for oil feed for turbo/sensor placement on my new Mast pan...

This is the brass fitting i want in stainless...

http://www.summitracing.com/parts/nos-16775nos

William

If you were REAL car guys you'd MAKE your fittings.... "built not bought" --- LOL



Oh my..... here we go! HAHAHAHAHAHAHAHHA

I'll be a fake car guy. I've made stuff like that while in school. I'll pay the $15 for it and let someone else have that fun.

I'm right there with ya!

And here is Greg stirring the sh*t pot

Does it have to be that configuration? Parker sells stainless fittings of all kinds.
https://www.grainger.com/product/PAR...Code=P2IDP2PCP

Easy peasy!

http://www.stainlesssteelfittings.co..._p/ss-5602.htm

(Check out the price of the large ones)

Like I said, I found everything damn fitting on earth EXCEPT the inverted flare I need!

Bill

Excellent, exactly what I was looking for. Needs to be that configuration cause there is no room above for the tee to be facing the opposite way.

William

Wilwood sells a prop valve that has 3/8" inverted flare holes so you don't need those ridiculous NPT adapters.

Andrew

Wilwood part number 260-10922

http://wilwood.com/Images/MasterCyli...922_dwg-lg.jpg

Thanks Andrew & Donny! I never thought of that. I bet that is no more 'pensive than a couple of the unobtanium adapters I'm after.

Looks like I will soon have a couple of Baer prop valves available.

Thanks again guys!


Bill