1st Gen convertible roll bar?
 

I need to install a roll bar in my 69 convertible, I see them all the time for coupes but nothing for verts. I want it to also help in adding rigidity so it might need to be a 6 point but I dont want it hinder as much as possible getting in and out. Any photos or ideas?
Thanks,
Mike

You should go to a shop that specializes in custom chassis and cages and get one made for your car. The quality is usualy better than you are going to get from a roll cage kit and It can be made exactly like you want it to be. My custom 6 point chromeoly cage was $1200 installed, and he did all the custom touches I asked him to do.

In my case, my installer used a S&W 8-point and modified the rear legs to go through my seat back. In my case a two seater is OK. The improvement in rigidity is amazing. ANyway, as you can see, there are several approaches. I like the upgrade.

71Nova, my problem is where I live in Washington there are no custom shops. The closest would be Spokane or Seattle and than I would not know who to go to. If someone could reccomend a place or someone that would be great!
Rick, Do you have pictures of your setup? Maybe I can get enough of a idea on how to modify one to my needs.
Thanks,
Mike

where in washington do you live? there are a ton of places that could build you a bar or cage.

What's your email address? Can't post as everything was lost when hobbystage went away.

Gotta love this site's options :)

Central Washington, Pateros 1 hour north of Wenatchee. About 3 hours from Spokane and 3 hours from Seattle. No one I know of around here I would trust. Heck pro-touring here is a set of kybs and 17" wheels.

weld 2 pieces of pipe together, side-by-side (in the shape of the roll bar of course), then weld on a flat piece of steel on top & bottom between the pipes. grind smooth & paint. it'll make a nice oval shape with a factory look as opposed to traditional large diamater roll bar dragster look.

https://lateral-g.net/forums/showthread.php4?t=5139

Some pics of my bar. Definatly go custom.

Contact Art morrison in Fife Washington they might do one for you.
Also they might tell you about some one closer to you cause they sell their products to alot of builders.

Or Chase Race www.chaserace.com in Duvall Washington.