Lateral-g Forums - In need supplier that sells a 22MM metric Rod end

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - In need supplier that sells a 22MM metric Rod end (https://www.lateral-g.net/forums/showthread.php?t=11601)

COYBILT

10-17-2007 06:44 AM

In need supplier that sells a 22MM metric Rod end

I need ot find a 22mm rod end that is teflon lined. Does anyone know of a supplier who would have this part? pegasus and HRP dont have them listed.

Scotch

10-17-2007 12:05 PM

Something like this?

http://qa1.thomasnet.com/category/metric-rod-ends?

If they don't have it, they probably know who would.

Good Luck!

~SP~

rwhite692

10-17-2007 01:17 PM

Did you already check here?

http://www.mcmaster.com/

COYBILT

10-17-2007 04:54 PM

I found a place called maryland metric that had a 22mm rod end. It is a rather large size to say the least.

Fluid Power

10-17-2007 07:27 PM

My company is a dealer for FK Rod ends but man, 22mm is odd ball to say the least. I had some 20mm but not 22. What is it going on? I can honestly say I have not seen one of those.

Darren

jannes_z-28

10-18-2007 02:02 PM

22 mm is very close to 7/8 inch (22.2 mm)

Jan

Teetoe_Jones

10-18-2007 02:38 PM

Check these guys.

Tyler

COYBILT

10-18-2007 04:02 PM

Im using them as a carrier on my steering shaft. I am running aircraft/ mil spec u joints on the car. The OD on the joints is .866 or 22mm exactly, I found them and its the only metric part I want to use on the car.

All times are GMT -7. The time now is 12:16 AM.