67 Camaro chassis info
 

If I use a Chris Alston complete subframe package, do I require a modified oil pan for the 99LS1 that I have purchased for my 67 camaro.. As of right now I do rrequire this modified oil pan without the new subframe..

No idea. What did Chassisworks say when you asked them about fitting an LS1?

Yes, you need to run a non-stock pan. Moroso or Milodon (I always get them mixed up) makes one that will give you good capacity and plenty of clearance. You will have to either switch sumps or modify the tube as well. However, if you have it in your stock subframe, any modifications that you've made will most LIKELY fit. The Chassisworks SF has more clearance than stock, but not THAT much more.

you must chop '98-02 camaro pan to clear xmember
 

you must chop '98-02 camaro pan to clear xmember. I have exact setup you are starting to build. i went with s and p to chop pan ...~$269 you supply pan.

Look To Your Left
 

http://www.autokraft.org/

sponsor here at Lat-G - great product!!