Lateral-g Forums - 1969 Camaro rearend width?

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - 1969 Camaro rearend width? (https://www.lateral-g.net/forums/showthread.php?t=13604)

unwrittenlaw191

02-21-2008 07:43 PM

1969 Camaro rearend width?

What is the stock width on 69 camaro? Also with running a DSE mini-tub how much narrower can you go and still get an avalible backspacing?

Thanks
Dustin

68protouring454

02-21-2008 07:58 PM

60 inch is stock width.
55 to 55.5 or so is the common width for use with a 12 inch wheel and 6 inch backspacing.

unwrittenlaw191

02-21-2008 08:17 PM

I am sorry is this backing plate to plate or axle to axle or....?

68protouring454

02-21-2008 08:36 PM

this is axle flange to axle flange

ItDoRun

02-21-2008 08:44 PM

Call DSE. They were very helpful.

ProdigyCustoms

02-21-2008 09:21 PM

Yup, Jake is correct. We sell and install lots of Mosers for mini tub, 55" flange to flange (including rotors / drums) and 6.2" backspace and you have a tick of wiggle room to shim if you need to.

67rstbkt

02-23-2008 11:14 AM

:willy: Would these same dimensions apply to a 1967? I'm planning on DSE minitubs but with a 17x11 rear width.
Thanks

ProdigyCustoms

02-23-2008 12:55 PM

With a 11" wheel I would do a 5 3/4" Backspace with a 55" rear.

67rstbkt

02-23-2008 07:26 PM

Thanks

All times are GMT -7. The time now is 10:37 AM.