Weld billet 18x10 wheels early camaro nova chevelle. ADDED PICS OF WHEELS ON 69 CAM
 

18x10 inch billet weld wheels

18x10 inches wide with 245 40 18 wheels all the way around 5 on 4.75 patern with 4.5 back space.

were machined to clear big brakes by weld when made I know for a fact they clear the 13 inch brembo setup as that was on the vehicle these came off.

not cheap to get these in this ofset and size as weld doesn't offer it its a special order deal not a off the shelf set.
also have the correct extra tall lug nuts for these that allow you to use extended studs without the studd sticking out of the lug nut.

These wheels were originaly on the unique performance HHR and have maybee 2-300 miles of use the car was never driven only loaded and unloaded from a trailer

wheels and tires cost just over 3k new.

http://i76.photobucket.com/albums/j1...f/DSCF0542.jpg

asking best offer over 1800.00

What city/state are the wheels and tires located ?
Why selling?

Thanks
Ron

k
 

I know they fit a 69 camaro because my budy bolted them up to his .. and they looked sick.

and we remeasured them

they are 9.5 inches inside of lip to inside of lip 10 inches out side to outside of tire mounting lip

so they could be considered 10 or 9.5 inches wide.

here are some pics added for you to see how they fit on a 69 ..

http://i76.photobucket.com/albums/j1...f/DSCF0575.jpg

http://i76.photobucket.com/albums/j1...f/DSCF0573.jpg

k
 

added pics of wheels mounted

Where are you located? Think they will clear 14" rotor and 6 piston caliper?

diamter yes
 

San antonio texas.. i can not gaurentee they will clear your claiper diameter wise YES they will clear a 14 inch rotor

they had 13 or 14 inch bear crosss drilled brakes all the way around on the HHR that these came off of..

they had the big pbr calipers however not the six pot so i cant say for sure if they clear 14 inch on your setup