Recipe for Pro-Touring
 

Here is one way to whip a fresh Pro-Touring basket of goodies:



Take one 67 Camaro-
http://www.pro-touring.com/~tylerb/5.jpg

Shake well, until all loose, old, crusty suspension falls out-
http://www.pro-touring.com/~tylerb/6.jpg
http://www.pro-touring.com/~tylerb/7.jpg

Add two parts of Wayne Due suspension-
http://www.pro-touring.com/~tylerb/8.jpg

Put Wayne Due sub on a flat sheet-
http://www.pro-touring.com/~tylerb/10.jpg

Dump contents of 67 Camaro onto subframe-
http://www.pro-touring.com/~tylerb/11.jpg

Take 1 tall deck big block, 2 engine plates, and a McLeod modular bellhousing and sprinkle them onto the front end-
http://www.pro-touring.com/~tylerb/12.jpg
http://www.pro-touring.com/~tylerb/13.jpg

(Note some firewall clearance may be needed. In case of engine setback, subsitute factory pedal mounting with Tilton unit)
http://www.pro-touring.com/~tylerb/14.jpg

For optimal results, place engine behind front axle centerline-
http://www.pro-touring.com/~tylerb/15.jpg

For a topper, try adding a set of 20x10 and 20x13 wheels-
http://www.pro-touring.com/~tylerb/16.jpg

When placing in oven, make sure oil pan does not hang below frame rails-
http://www.pro-touring.com/~tylerb/17.jpg

Take Wayne Due brackets and place welder on tack for 15 min-
http://www.pro-touring.com/~tylerb/18.jpg
http://www.pro-touring.com/~tylerb/19.jpg
http://www.pro-touring.com/~tylerb/20.jpg

Blend Guldstrand components-
http://www.pro-touring.com/~tylerb/21.jpg

Slide rear into sheet with Camaro and Subframe-
http://www.pro-touring.com/~tylerb/22.jpg

Serve with loads of horse power-
http://www.pro-touring.com/~tylerb/23.jpg

That's all for this edition of Cooking with ATS .

Please join us next week for more baking and preperation secrets.



Tyler

I like looking at pretty pictures. Thanks. Where do the forward links of the rear suspension mount? I assume you will open up the firewall, yes?

The 4 link portion mounts to a bracket not yet welded in. It goes between the frame rail and the inner fender.
The firewall and tunnel will be removed for this car.
It is coming along nicely. As soon as the other 3 wheels/tires show, I'll pop it on the ground for a nice look, then off to the body shop for a few months.
Tyler

Cool!...I those half shafts are ready for battle against the torque of that big block!....nice work.

I have a pair of Carbon Fiber half shafts on the way, along with full Guldstrand camber kit, 4 link bars, and tie rods. It will hold as long as those 20 wheels never hook!
Tyler

Excellent....will really be a neat car when completed.

Very nice Tyler. Awesome work.

Mike

Looks great...keep us posted. You gotta be getting more and more excited by the day.

Tim

Awesome, you'll have to keep us in the loop. When is the expected delivery date?

Tyler,

Does that Tilton unit Come with a gas pedal also?