Power rack and pinion with hydraboost
 

Hopefully this is in the right category. Is anyone using a power rack and pinion set up and a Hydraboost system? I realize it will be alot of plumbing. I'm just wondering if you've run into any issues with it or anything you can tell me about it. Thanks.

I'm running that combo in my Mustang. It works great, and I have very little crosstalk between the Hydraboost and Power rack. My PS pump is a KRC unit, so is my PS fluid resorvair. I also had the resovair fitted with another -AN 6 bung for the Hydraboost low pressure return line, instead of tunning a T.

You just need to run a PS pump that can handle the task, the KRC pump can easily change the flow-valve (big blue fitting on the pump) to get the gmp you need. Also the resorvair is big enough, so that you don't pump it dry.

http://home.no.net/fvike/images/Dsc02694u.jpg
The engine bay has been washed after this picture :D

Here's a picture when I installed it, the low-pressure return line isn't in that picture, because I hadn't fitted the extra AN bung, but you get the picture.
http://home.no.net/fvike/images/Dscn0195u.jpg

Hope this helped.

Thanks for the photos. They will definately help.