Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)
-   -   200-4r (https://www.lateral-g.net/forums/showthread.php?t=16102)

Musclecar 08-13-2008 09:28 PM
200-4r
 
Is anyone running a 200-4R in a 69 camaro? I am trying to find out how long my drive shaft needs to be. I was hoping someone is running this setup and can tell me the length that way I can go ahead and get my driveshaft done while I am installing the transmission.. I have a moser GM 12 bolt. Thanks

Garry

camcojb 08-13-2008 10:06 PM
Quote:
Originally Posted by Musclecar (Post 161302)
Is anyone running a 200-4R in a 69 camaro? I am trying to find out how long my drive shaft needs to be. I was hoping someone is running this setup and can tell me the length that way I can go ahead and get my driveshaft done while I am installing the transmission.. I have a moser GM 12 bolt. Thanks

Garry
the 2004R is the same overall length and yoke as a th350/4-speed, but uses a th400 crossmember as the mount is further back. So I do not know the length, but a stock th350/powerglide/4-speed driveshaft would be the correct length.

Jody

Musclecar 08-15-2008 06:40 PM
Thanks for the reply.. I found out today that it is the same length. I got the transmission in and put the driveshaft in place just to take a look at it and it fit! That will save me a few dollars! Thanks again for the replly...

Garry


All times are GMT -5. The time now is 04:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net