Resivoir for hydro brake system
 

any ideas? I need 3 outlets and it has to be vented. something that mounts on the core support or inner fender.

you need an outlet for the pump (if you arent using a standard saginaw pump) and one or two returns.. (if you run one return you will need to use a tee fitting to connect both the steering and booster low pressure returns..)

I have the pump that came with my march pulley set up.

i made that same mistake:-(

i believe it can be fixed by tee'ing from the low pressure return to the bottom outlet of a single outlet reservoir on the radiator core support level with the march reservoir... that way you are increasing the available volume...

Mark, somebody makes the exact reservoir that you're talking about, it's a really nice, fabricated piece... but for the life of me, I can't recall who makes it.

I know Kugel Komponents makes a single, double and triple reservoir, but I don't know if it would work for your application or if it has enough capacity.

I was planning on using the single for my hydraulic clutch.

http://www.kugelkomponents.com/produ...cessories.html

Billett specialties said they have a few but I want to make sure I'm getting the right thing.

http://www.pscmotorsports.com/reserv...c-161_223.html
I have this one its very nice...
BC