Lateral-g Forums - T56 Slave quick connect?

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - T56 Slave quick connect? (https://www.lateral-g.net/forums/showthread.php?t=20109)

murtah

04-05-2009 04:45 PM

T56 Slave quick connect?

1 Attachment(s)

How far into the connect receiver on the GM slave does the master connect fitting go? I have the ATS supplied master and slave.

I hooked it up but the male end only went half way. I can push the connector all the way in but it rebounds to half way. Is half way correct?

I have inculded a photo. The hyd line is wrapped with a fire sleeve.

murtah

04-05-2009 07:15 PM

Where is everyone today? No 6 speed owners on the net today?

XcYZ	04-15-2009 06:48 AM

It's been a while since I messed with it, but I'm pretty certain that's how mine is, too.

Payton King

04-15-2009 07:03 AM

That is correct

You can see the white sleeve. To remove it, you push that sleeve in with a special tool or a screwdriver, if you are real careful. If it went all the way in you would not be able to get it to release.

I guess I am going to reply behind everything Scott posts today.

All times are GMT -7. The time now is 10:58 AM.