Vacuum Lines LSI Help
 

OK we got the car running last week but I have no idea what to do with all the vacuum lines on the manifold and valve covers.

I have a 98 LS1 with perimeter valve covers.There are two outlets on the passenger side and one one the drivers side rear.

There are 3 on the throttle body and 1 on the rear of the manifold.
Any Ideas? Picks would be very helpful.

i can fax you pic if you have a fax #

pm sent

fax sent hope it helps diagram from 02 camaro...............good luck..............anthony

Thanks Anthony, more of a factory set up but it may get me started. I have no emisions on this motor

I will take a pick with out the covers

#1 hvac is for factory a/c control you can plug #2 power brake booster #3 evap system you can plug #4 evap you can plug #5 evap purge disconect and plug #6 throttle body #7 go' to pcv valve #8 egr valve disconect unless your runing cat's #9 & 10 go to breather or cold air intake hose i don't think you need both.

nice looking engine bay look's like your doing a bang up job.

Thanks, it's coming along slowly.