Size/fitment of Lee box?
 

I have been getting ready to pick up a new box for my 69 Camaro, as I've heard it makes a tremendous difference...I've got an LS1 with Stainless Works headers on it, that have the second primary wrapped on top to clearance the box...will the Lee box clear my headers?

http://img.photobucket.com/albums/v4...p/IMG_1553.jpg

Thanks,

-Adam

My lee Box is GIGANTIC and I've tried 4 sets of headers trying to get it to fit....

I ended up having a set of patriot headers modified by a local exhaust shop and recoated...

the question isnt will a lee box cause they sell a 670 box and a 800 box for our cars.
the 670 is a smaller box than a stock power steering box so if you have a stock power box now youll gain more room. its lighter also
the 800 is the same size as the stock.

I use 600 boxes. A bit more petite and i love the feel.

It also depends on which adapter plates you used to mount the LS engine. The further back, the easier (i.e. Edelbrock, Hooker).

This was taken at the begining stages of my build. I'm running an ATS box and the Autokraft/ATS mounts, with Stainless works headers. I had to massage two tubes..It was super easy with the headers since they came in raw form. I just did some heating bending then just polished it right up..

Kind of hard to see in this pic but it might help some..Good luck

http://i25.photobucket.com/albums/c8...s/100_2993.jpg