Lateral-g Forums - Stamping Sheetmetal

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)

- - Stamping Sheetmetal (https://www.lateral-g.net/forums/showthread.php?t=24543)

xpsled

01-06-2010 03:40 AM

Stamping Sheetmetal

Hey guys just wondering what different techniques/methods/machines people are using to stamp floor pans, wheel tubs etc. Some peoples work looks awesome. (I stole a couple of pics, hope you dont mind!!!)
https://lateral-g.net/forums/atta...1&d=1262751255
http://i370.photobucket.com/albums/o...m/DSC_0565.jpg

GregWeld

01-06-2010 12:00 PM

You stole those from WAR --- and he said he's using a bead roller....

elitecustombody

01-06-2010 12:36 PM

yep, looks like bead roller

70rs	01-06-2010 01:53 PM

Not sure if it was WAR or another one ( might have been one of the Austrailian builds going) but they used a wood form and hammered the detail in around the edges. It was a top and bottom plate with the design shaped in them, metal between both plates and just tap away till it gets there. :cheers:

Garage Dog 65

01-06-2010 07:19 PM

First one is from Best Camaro in the Universe thread. Second is from War's 69 thread.

You can make them with a: Bead roller, stamp die, hammer form, or power hammer with flange die.

Jim

gearheads78

01-06-2010 09:36 PM

Quote:

Originally Posted by Garage Dog 65 (Post 259387)

First one is from Best Camaro in the Universe thread. Second is from War's 69 thread.

You can make them with a: Bead roller, stamp die, hammer form, or power hammer with flange die.

Jim

I think the first one is from the Runt Chevy II

Garage Dog 65

01-07-2010 10:02 AM

Quote:

Originally Posted by gearheads78 (Post 259457)

I think the first one is from the Runt Chevy II

Crap, that's what I meant... Thx !

All times are GMT -5. The time now is 06:33 AM.