406
 

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT

Never run complete intake-to-pan Chevy 406


http://i9.ebayimg.com/02/i/05/95/45/ff_1.JPG


511 block casting

4-bolt block

SFI flywheel

ARP bolts

Moroso 7 quart pan

-Scrapper, trap doors, welded pickup, etc

Double roller timing chain

Comp Cams solid flat tappet cam

-.540 lift intake/.558 lift exhaust (Part # - 12-679-5)

Comp Magnum lifters

Proform 1.5:1 roller rockers

215 Dart angle plug Iron Eagles milled to 49cc

Cast crank

H-beam rods

Flat top pistons

Victor Jr. intake recently sandblasted

-Matched to 1206 gasket along with the heads

12.5:1 compression ratio


This engine has never been in a car. It should easily make 550HP.

It doesn’t include an ignition, carburetor or the carb spacer. The valve covers will be used stamped chrome in place of the current ones that say Edelbrock. I have a good size package of information and receipts that will be included. Pick up in South Jersey would be great, but not necessary.

I need to sell this as soon as possible. Make an offer.