Rushforth 17" Super Spokes F/S!
 

SOLD!!!! Thanks Guys. We have another set that is completely brushed in the exact same specs if anyone's interested. I'll get them listed.

These were accidentally drilled with GM lug pattern instead of the 5x4.5 pattern they were supposed to get so they need to go!

Matte black centers with polished hoops in a nice basic fitment that will fit a lot of cars.

Retail for powdercoated 17s: $2250. We can ship these tomorrow for $1875 + shipping.

If you like these but they aren't quite right for your application, give us a call and we'll quote you for whatever you need.

17x8/ 4.75" BS/ 5x4.75 Bolt Pattern

17x10/ 5.5" BS/ 5x4.75 Bolt Pattern

http://i256.photobucket.com/albums/h...s/DSC01864.jpg
http://i256.photobucket.com/albums/h...s/DSC01863.jpg
http://i256.photobucket.com/albums/h...s/DSC01862.jpg
http://i256.photobucket.com/albums/h...s/DSC01861.jpg

Will the 17x10 fit the rear of a stock 64 Chevelle?

Not sure about 64s but it sounds like a squeeze. Measure from your mounting surface to the inner and outer obstructions. You'll need 12" overall to fit a 10 and be safe with the mounting surface almost dead center to run these 10s.

Maybe
 

Is it reasonable to replace the inside hoop on the front two wheels with one a 1/2" wider to make an 8.5" wide wheel with 5.25" back space? Just trying to make it happen. Thanks, S.

17x8.5 isn't a standard width so it would be a custom order that would bump the price pretty dramatically when an 8 will actually hold the same tire as an 8.5" wheel.

Hello
 

Was wondering if these would fit a 72 Chevelle? Has a little drop all the way around the car but nothing to drastic.

thanks

As you know, you have roomy wheelwells, so they'll fit just fine.

They will fit a 73 camaro?

yes they are actually perfect widths and offsets for a 2nd gen

man i wish these were 18s! i would be all over them as theyre perfect for my 73 camaro