Power Performance Motorsports 2nd gen Camaro tall ball joints review
 

I just finished a test of .5" taller upper and lower ball joints. These are made by Power Performance Motorsports for 2nd gen Camaro/Firebird.

They make impressive gains in neg camber, the upper being the most beneficial with very low impact on bumpsteer. The tall lowers add a little more, but bumpsteer is worse. The 2nd gen steering linkage can be moved around quite a bit to improve bumpteer and even with tall upper and lower balljoints our early runs with the test car do not produce any noticeable steering feel problems.
David
Link:
http://www.pozziracing.com/second_ge...o_tall_bal.htm

Chart:
http://www.pozziracing.com/Media/1971_camaro_data.jpg

Dave, do you happen to have a similar chart for first gen's? Do you know if the Global West UCA's came with a longer ball joint?

Here are test results for 1st Gen using tall ball joints.

http://www.pozziracing.com/power_performance_motorspo.htm

Gracias!!:thumbsup:

Hi Dave,

Would these be something i should consider using with my new Ride-Tech suspension.

ps - yes it's on my 70 camaro project / not the little s10