Ls7 coming together!
 

I dropped by my motor shop and my motor is coming together. Short block is being assembled just waiting on heads. Woo hoo!!!

Just saying

http://i73.photobucket.com/albums/i2...c/IMAG0217.jpg
http://i73.photobucket.com/albums/i2...c/IMAG0216.jpg

Lets get some specs on that Badboy :D You gonna have Billy dyno it when its done?

It's a procharged motor wet sump motor. I'm going to run a D1SC with the helical gear set. Mild cam so it's hopefully somewhat of a sleeper when it's idling. Wiseco pistons, K1 rods, ls7 heads with upgraded valves/springs. Fast 102 intake. Goals for boost are about 15lbs, we'll see depending on how much the motor makes on the dyno NA. Goal is 900hp hopefully a bit more. Taking a page from the ls9 and going with piston squirters. The car is a 69 camaro with a T56 from D&D.

What kind of valves and springs are you using?

Stainless int and inconnel exh. Stock sizes. I'll be running PAC springs.

Motor porn. :D

Very nice indeed. That is going to be one beast of an engine. I bet you hit that goal of 900 HP.
Good luck and keep us posted!:thumbsup: :cheers:

Here are the piston squirters. Side note, if anybody is looking for these for an LS7 or RHS block I have an extra set.

http://i73.photobucket.com/albums/i2...c/IMAG0218.jpg

Yes they will be doing the break in on the engine dyno. Hopefully Mid December!