brake help
 

Its probably a long shot but does anyone know what size the banjo bolt would be on a C6 caliper? I have been to 3 different auto parts stores and nobody carries them or even knows the size they are. Thanks

Do you want to know the thread size?

yea thread size or if you got a part number that would be awsome. thanks

Have you tried 10mm x 1.0 ?

I think that's what I used on some C4 calipers.

Have you tried to see if they have them at a Chevy dealer?

That's what I figured was that it was m10x1.0 but the parts store didn't carry any. My chevy just opened up yesterday from an owner change so I havnt tried yet

Found these part numbers on ls1tech
banjo bolt 22163795
banjo bolt washer 10139097

Just to confirm what was noted above, the thread size and pitch of the C4/C5/C6/LS1 F-body banjo bolts is M10x1.0. You should be able to get a Dorman #13912 at any auto parts store with access to Dorman parts or their "Help" products.

Tobin
KORE3

Thanks for that part number. One question though, when I look it up it says that its for the rear? would that make a difference if put on the front caliper?

No difference front to back as far as I know.

Tobin
KORE3