What brake line fittings do I need?
 

I'm planning on ordering a bunch of fittings to do my brake lines. Here's what I have so far. This is for the rear housing. What fittings would I need to do the front end leading to the back of the car. I have 4 wheel discs with a Wilwood master.

http://www.summitracing.com/search/?...=fbm5769&dds=1 One of these for the passenger side. Will connect to a hose that will run to the caliper.

http://www.summitracing.com/search/?...=fbm5030&dds=1 Four of these, one for each caliper.

http://www.summitracing.com/search/?...=fbm5556&dds=1 Two of these for the bulkheads.

http://www.summitracing.com/search/?...=fbm5815&dds=1 One of these for the driver's side. Will connect to a hose that will connect to the caliper. Another hose will run off the top to the hard line on the rail.

Any suggestions would be greatly appreciated. Thanks in advance.