Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Engine (https://www.lateral-g.net/forums/forumdisplay.php?f=37)
-   -   Air cleaner option for QF 1250 dominator carb (https://www.lateral-g.net/forums/showthread.php?t=33197)

Adam68 08-14-2011 06:04 AM

Air cleaner option for QF 1250 dominator carb
 
Hi All
I am looking for a air cleaner set up for the following set up
STD deck big block
Super victor milled down 1/4 inch to make it the same height as a Victor Jnr
MSD dizzy
It needs to fit under a 68 Camaro 2 inch cowl bonnet with the standard underside recess
I am going to call Universal Spinners tomorrow but there 2inch drop base set up but it is 16 inch and won't fit in the bonnet underside recess
I have thought about using a small 16 inch filter with their set up and them back to back with the top and bottom cut out a 14inch KN X top filter with the smallest 14 inch filter.
Does anybody know the approximate height from the bottom of the manifold to the underside of a 2 inch or another option that will work?

bearcat 08-25-2011 11:02 AM

I have a universal spinners bottom plate for a 4500 series carb. Assuming you want to switch to that size element, I can sell it to you for a good price. I barely used it and switched to a 4150. Oh, It fit on victor intake, dominator carb, lowered suspension under a 2 inch hood.....barely, but it fit. Let me know if you want it. 50 bucks and I'll send it your way.

JustinB 08-25-2011 11:31 AM

If lowered suspension had anything to do with making a motor fit under the hood, I could fit two of my big blocks on top of each other under my stock cowl hood! lol. :cheers:




Quote:

Originally Posted by bearcat (Post 366993)
I have a universal spinners bottom plate for a 4500 series carb. Assuming you want to switch to that size element, I can sell it to you for a good price. I barely used it and switched to a 4150. Oh, It fit on victor intake, dominator carb, lowered suspension under a 2 inch hood.....barely, but it fit. Let me know if you want it. 50 bucks and I'll send it your way.


bearcat 08-25-2011 11:45 AM

Quote:

Originally Posted by Justin@driverzinc (Post 366996)
If lowered suspension had anything to do with making a motor fit under the hood, I could fit two of my big blocks on top of each other under my stock cowl hood! lol. :cheers:

haha....well obvious I was stating that it worked with a lowered bushings in the frame and dropped spindles.....

JustinB 08-25-2011 01:26 PM

I know what you were getting at. Just had to bust your chops! :thumbsup:

Quote:

Originally Posted by bearcat (Post 366999)
haha....well obvious I was stating that it worked with a lowered bushings in the frame and dropped spindles.....



All times are GMT -5. The time now is 11:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net