Any one versed in decoding block #'s
 

http://photobucket.com/albums/e143/jerebus67/?sc=3

Can someone help me run the #'s on this block. T1108HB
The date on the cowl of the car is 12C.

He said he ran the #'s of the motor when he bought it and it is an original SS350 drivetrain car. Can someone help me confirm this is the matching motor?

HB is a 69 350 / 300 code. it is probably a 386 (last 3 numbers) casting number. It should have a VIN on it also. If the last 6 of the second set of number match the last 6 of the VIN (not the trim tag), Your iynn like flynn

Do you know where those codes should be on the block?

69 and older cars, it should be on the pad on the front of engine. This is where the other number you posted above was right? Should be located on same pad. The numbers you posted are usally 1/4" size, the other one is 1/8 size. Or visaversa, I am having an old age moment right now.

Also, the VIN could be located under the car on the raw engine casting on a vertical pad just above and in front of the oil filter

Web Site?
 

would there be a web site out there with this information? I have a similiar situation also. I have a 396 (T1201IV Front Side) ( 3902406 Rear Side )that I would like to know what it came out of, And I also have a buddy that has a 67SS and he would like to see if his #s match. Year one says you can find the info on it's web site, but i have had no luck locating it?
Dave

Camaros.net has a section for decoding numbers. Very knowledgable people.

MorTec is a great resource.

Yearone
 

Thanks Scott, i'll look at that one also. I looked at YearOne again and located there page.(I'v been there several times and could never find it , but today was my lucky day.)
http://www.yearone.com Scroll to Engine I.D. and Codes
Dave

Some help?
 

The only thing i could come up with was;
T= Tonawanda or Flint Mich.
11= November
08= Day of Month
HB= 350cid/300hp/1969 CamaroSS
Hope this was some help :thumbsup:
Dave