DSE Coil Over Kit
 

Can anyone post up some pictures of there DSE coil over kit install. Im having a little issue of the shock hitting the shock tower, It's barely touching, but I dont want to grind on anything.

Thanks Kirk

post a pic. Do you have the suspension loaded? not on jack stands etc.

Thanks Jay,
I do not have the suspension loaded yet, The sub frame is out of the car. motor is off of subframe. I will try and get it mounted up and set back on ground, Wheels don't come in until mid next week

Thanks again Jay

You have the new style coil overs right? THe afco/DSE ones?

If so you have to trim the mounts. I had too.

Kyle and i talked about that when i did mine, i was one of the 1st to have the new coil over for the stock sub frame.

Thanks for the reply Bad94, I have the DSE coil overs, Just got them a month ago, I have a call into DSE, Do you have any picture of your shock towers?

Thanks Kirk

I know I have the original style, but may I ask what is different about the new ones?

I trimmed mine a bit too. Ultimately didn't have to since I needed to turn the collars down a bit since it was setting too low. Don't be afraid:thumbsup: